15% Cars Fuel Saving Chip Eco OBD2, Economy Chip Tuning Box OBDII, Car Fuel Saver Eco OBD2 for Benzine Cars

Product Details:

• New Arrival EcoOBD2 Plug&Driver OBD2 Green Scanner For Benzine Cars Professional Auto ECU Chip Tuning Box Economy Device Plug and Drive EcoOBD2 Economy Chip Tuning Box for Benzine 15% Fuel Save
•  It works based on OBD2 protocols as remapping the Car’s computer ECU. After driving a 200 km road total, EcoOBD2 adjusts itself to the car, according to the drivers’ habits, and always keeps remapping the ECU to save fuel lower and immission.
• EcoOBD2 help you save fuel consumption: – Up to 15% fuel savings
• EcoOBD2 works on the basis of changing the signal from ECU. As a consequence, it changes the whole injection map. The main difference between EcoOBD2 Chip Tuning Box and the Remapping tuning methods is that EcoOBD2 Chip Tuning Box is easily removable, and after unplugging you go back to the factory settings. EcoOBD2 is a cheap and safe type of tuning. Remapping is a permanent change to your car. This is an expensive tuning and you cannot remove it. EcoOBD2 is equipped with the engine protection function and is 100% safe for your car engine. EcoOBD2 is produced on the printed circuit board in SMD technology. EcoOBD2 Chip Tuning Boxes are high quality.

Specifications:

Installation And Calibration:

• Pull the Car Key out from the ignition.
• Find OBD2 connector(*) in your car and Plug in EcoOBD2.
• Insert the key into the ignition and twist the key to the first stage. (Do not start the car).
• Press the reset button for about 5 sec. After releasing the button, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish a connection with ECU).

Startup the engine:

• EcoOBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles of driving and thus EcoOBD2 will adjust itself to match your car perfectly for more fuel saving.

Does your car have an OBD2 connector?

• On-Board Diagnostics, or “OBD,” is a computer-based system built into all 1996 and later light-duty vehicles and trucks, as required by the Clean Air Act Amendments of 1990.
• OBD systems are designed to monitor the performance of some of an engine’s major components including those responsible for controlling emissions.

OBD2 necessarily for cars:

• Sold after January 1, 1996, in the USA.
• Sold after January 1, 2001, in the European Union.
• With diesel engine sold after January 1, 2003.

Where located the OBD2 connector in your car?

• Driver’s side, underneath the dashboard, in the area under the steering column.
• Between the driver-side door and steering column area.
• Between the steering column area and the center console.
• Driver’s side, dashboard instrument/gauge area, between the steering column and center console.
• Between the driver-side door and steering column.
• Center console, the vertical surface left of vehicle centerline.
• Center console, the vertical surface right of vehicle centerline or on the passenger side of the center console.
• Also at the center console, horizontal surface in the front passenger area.

Package Included:

• Eco OBDII x 1